MIL-LDCBS1x2

MIL-LDCBS1x2
Base price: $550.00

Features

  • Precise Amplitude Balance
    • Less than 1 dB variation between ports.
  • Flat Group Delay
    • Less than 1ns variation between L1 and L2.
  • Low Insertion Loss
    • -4.0 dB loss is typical across all operation frequencies.

Description:

This Military Qualified Loaded DC Blocked Splitter 1X2 (MIL-LDCBS1X2) is a passive one input, two output RF splitter that splits signals from 1.1 GHz to 1.7 GHz. This equipment is designed to passively split signals within the L-band to provide multiple devices with the signal from a single antenna. In the standard configuration, the J1 port will pass DC voltage from a connected device and pass this power to the antenna or other devices upline from the splitter. The other port (J2) is DC blocked and loaded with 200Ω resistors to simulate antenna current draw which prevents antenna alarm faults. All MIL-Spec splitters are qualified to the rigorous MIL-STD 810F environmental & MIL-STD-461F EMI standards. Custom gain, DC power, and connector configurations are available upon request.

Use Cases

  • Splitting a roof antenna signal between 2 GPS/GLONASS/GNSS receivers.
  • Splitting a WAAS antenna between WAAS receiver and ADS-B.
Required

Connector Type

Connector Type is required. All connectors are female.

Optional

Networking - External Power Supply ($100)

To purchase the Networking option, you will also need to select Source and Output options below.

Output (Voltage to the Antenna)

You will also need to purchase the Networking option above.

Source (Power Option)

You will also need to purchase the Networking option above.

CLICK HERE FOR DETAILS ON POWER OPTIONS


$550.00
Add To Cart
Call or email us regarding quantity discounts on 5 or more items at 1-800-463-3063 or SALESTECH@GPSNETWORKING.COM